Search results

  1. P

    suzuki df9.9a Hard start. No run

    I use this df9.9a I believe its a 2014. last year of the carb .as an aux or trolling motor. It never started or ran well. Shop I bought from stopped serviceing them right after I bought it. Found another and they said its bad gas. I am quite particular with my fuel. Always treated and filtered...
  2. P

    1998 Honda bf9.9 no spark.

    Hi there, I have a 98 honda 9.9 that has no spark. I have disconnected the kill switch and still no spark. I have not picked a manual up yet so would appreciate some steps to sart with. Babl 1204405. Thanks
  3. P

    98 s150txrw. troubles.

    I have a s150txrw bracket mounted on a 19 foot cuddy. I bought just over a year ago as a used rebuilt . It then started acting up on accelleration out of the hole. I believed this to be fuel related and have rebuilt the carbs and replaced both thermostats and fuel pumps .Everything is set to...
  4. P

    Plastic Carb roller ( accelerater cam to Carb )

    Hi guy's. I have a 1998 s150txrw' Carbed. My plastic roller has a flat worn on it and needs replacing. My Yammaha dealer is having alot of trouble finding the part # for it. Anyone come accross this already? It rides on the shaft of the middle carb and rolls against the accelerater cam ...
  5. P

    1998 s150txrw yamaha link & sync?

    Ok I'm now going to try to fix my next issue. When accellerating slowly it seems to have some sluggishness and bogging down, This is greater if I accellerate quickly.This s150 is carbed and has a choke . The Carbs are off a 200 hp. The center carb is correctly linked to carbs above and below.I...
  6. P

    Yamaha instrument problem.

    I have mounted a 1998 s150txrw on my 19' Calais. On a pod. It is replaceing a 1990 200 etxd. I had bought the required connectors to work with this year of engine. Things have gone ok untill one day I started looseing my Tac. ( Yamaha lcd ). Just faded in and out till gone. A couple days later I...
  7. P

    Yamaha wireing differences, 1990 vs 1998

    My 1990 200 etxd unfortunatly had a nasty old 6208 bottom bearing I wasnt aware of untill it went Bang!. That being said , I was able to pu a 1998 s150txrw in great shape cheaper than repairing the 200. I have wireing harness differences though. 10 pin is the same. The 98 has a 4-pin that...
  8. P

    Hey Rodbolt,Can get pump running with emerg. switch now but not automatic.

    Hi there. I Have an issue with the oil transfer from the remote tank to the engine main tank. 1990 200 etxd. I have searched the forums and found very helpfull info. Did the regular checks/tests of sensors and found the trim/tilt sensor out of spec. Thought I had her licked till I just recieved...
  9. P

    Yamaha timing plate

    Hi there. I have a 200etxd. I picked up a seloc manual to give my timing a look at. Maybe I should have spent the bucks and bought a yammy one lol.I followed the instructions in the manual over and over. .012 before tdc from # 1 cylinder. Timing pointer reads 6 to 7 degree's. If I follow the...
  10. P

    200 hp yamaha- Need cable

    Hi guys, I need a cowling release cable #6R3-42850-00-00. And a pipe #6G5-43833-00-00 ( for power tilt)Any of you parts guys have new one's in stock?? I used a metric brake line for a couple years but the salt water is harsh lol. 200 etxd. Thanks guys.
  11. P

    1991 Calais cuddy , Anyone have information for a BC made 19" calais.

    I have a 19' made in BC Canada calais cuddy. I run a 200 Yamaha mounted on a external bracket. I have no idea what this boat is originaly supposed to weigh. Any info would be great TX
  12. P

    Rust stains in gelcoat

    Hi Does anyone have any suggestions for removing rust stains from a gelcoat surface?? TX
  13. P

    Caulking

    Hi I have just removed and cleaned my under deck fuel tank. I now have to reseal the Deck cover. I removed as much of the old caulking as i could but theres still a lot left. Can some one suggest the best solvent for this job. Thanks
  14. P

    Fuel

    Have just got back from a fish'n trip that while cruising back to camp I lost all power. While troubleshooting I found that no fuel was passing to the motors. Checked the fuel/water seperator and Have what looks like a clear silicon gell blocking the filter. It also plugged the fuel supply line...
  15. P

    200 hp Yamaha is sick.

    My 1990/91 200etxd is acting up. I have done a compression test and all cylinders are good. I made a spark tester and all cylinders seem to spark but dont know how good. ( can I measure this?) I replaced the fuel filter/ water seperator and spark plugs this spring. Problem started with a...
  16. P

    Power tilt & trim

    Just got back from a great day at the lake . But !! while we were there I lost my power trim & tilt. Could hear the pump but no action. On inspection I discoverd It had leaked out fluid ( was all around the water line). Could not see where it had come out so tomarrow I will add more fluid and...
  17. P

    Mich.Wheel Pro-Pulse Prop.

    Can anyone comment on the pro's and Con's For this adjustable pitch 4 blade Prop. am looking at a 14.5x 15 to 21 pitch. Currently using a 13.75x21m Thanks
  18. P

    hight of outboard??

    I,ve noticed on these boards the talk of hight of prop. Is there a formula or rule to follow for setting the hight of the motor / prop? Cavitation plate hight in relation to hull? Thanks
  19. P

    prop hub torque and diameter of prop.

    Can anyone tell me the proper toque for my 1990 200 hp. Yamaha's prop nut. Going by feel it doesn't line up with hole for the cotter pin. And in regards to replacement props I read a lot and understand how the pitch effects things but what about different diameters?? Am using a 13.75 x21 5200...
  20. P

    9.9 Rude, weak spark

    I have a 9.9 rude model e10rcra ser#c7174695. Seems to have a weak spark. Tested the charge coil and sensor as per "No spark " post earlier. I have 496 Ohms on the charge coil and 39 Ohms on the sensor. I did compare the two coils and got 246 Ohms from secondary to ground and 001 Ohms accros...
Top