Search results

  1. L

    2.5 Yamaha prop problem

    I have a 2006 2.5 HP four stroke Yamaha on a 12 ft Aluminum boat. The problem is it will start right up and go to 1/2 throttle with no problem. When I go from 1/2 to full throttle there is no difference in RPMs. I have checked the throttle on the carb and it is wide open. The motor has about...
  2. L

    2.5 HP Yamaha outboard

    I have a 2.5 hp Yamaha 4 stroke outboard that I just bought but I have no operators manual. I would like to know what RPMs it should idle at?
  3. L

    What spark plug

    I have a 1972 4 HP Evinrude Yachtwin and I am wondering what spark plug should it have? When I bought the outboard it had a RJ12 C this is at the top of the heat range.
  4. L

    Removed oil tank

    I have a 1991 Yamaha Pro P50TLRP I have rebuilt the engine and have gotten rid of the oil injection system. Now I have no spark, what do I need to do to fix this? This does not have all the lights on it for the oil warning.
  5. L

    Compression check

    I have a 1972 Evinrude 4 h.p. Yacht Twin that only has 75 p.s.i. on both cylinders. Is this a normal reading or is it low?
  6. L

    Proper fuel mix

    I just bought a 1972 Evinrude 4 HP Yachtwin and I am wondering what the proper fuel mix is.
  7. L

    Hydrofoil

    I have a 86 Bayliner Capri with a 130 HP Volvo Penta engine and a 275 O/D. When idling along in gear it looks like a drunken sailor behind the wheel it wanders all over. I have checked the steering and there is very little play not enough to bother that much. I am wondering if it is the...
  8. L

    engine flooding on idle

    I have a 1979 470 3.7 Mercruiser with a Rochester 2 G V carb the engine starts fine cold and hot. I have had the carb apart and set the float to the factory settings along with every thing else. It will idle fine for a while and then it starts loading up with fuel. I have adjusted the idle...
  9. L

    engine flooding on idle

    I have a 1979 470 3.7 Mercruiser with a Rochester 2 G V carb the engine starts fine cold and hot. I have had the carb apart and set the float to the factory settings along with every thing else. It will idle fine for a while and then it starts loading up with fuel. I have adjusted the idle...
Top