Search results

  1. Bondo

    Mercruiser 3.7 4 Barrel Electric Choke

    Ayuh,..... Welcome Aboard,....... What's it got now for the choke,..?? The electric element for a rochester should be a dime a dozen, most anywhere ya look,.....
  2. Bondo

    2012 3.0L TKS runs great with muffs, but slow on lake...

    Ayuh,..... The throttle cable should be pushin' the throttle linkage, firmly against the idle adjustment screw,....
  3. Bondo

    engine mounted raw water pump with alpha drive

    Ayuh,...... You cap-off the transom so you don't flood the boat, 'n cut the hose outside, 'n let the water flow freely,....
  4. Bondo

    1979 Starcraft American Offshore 22’

    Ayuh,..... Welcome Aboard,...... Without pictures,... it didn't happen,....
  5. Bondo

    Switching mercruiser throttle controls

    Ayuh,...... I have no idea, never seen a controller like that, just saying what I said above,.....
  6. Bondo

    Switching mercruiser throttle controls

    Ayuh,.... Did you try pulling out on the lever,..?? Never seen a control, without a neutral only,....
  7. Bondo

    1994 bayliner trophy 24 foot walkaround

    Ayuh,..... I assure you, there is foam in it,.....
  8. Bondo

    1994 bayliner trophy 24 foot walkaround

    No, adding foam, adds weight,..... Weigh the boat, my guess is the foam already in it, has taken on water weight,....
  9. Bondo

    why different wells on ob chieftain 18 have 1 have 2 boats apr one 14 and one 25 in deep

    Ayuh,... Welcome Aboard,....... 1 is set up for a 15" outboard, the other is set up for a 25" outboard,......
  10. Bondo

    Help with early 80s mercruiser 140hp

    Ayuh,..... So pull some plugs,... Are they firing,..?? Is it getting any fuel,..??
  11. Bondo

    Alpha One Gen One water stream?

    Ayuh,...... Welcome Aboard,...... That's the idle relief port,.... My guess is, the motor has overheated at some point in it's life, causing the shutter to burn up from a lack of water, 'n fell down into the down-pipe, blocking the exhaust flow out the prop,....
  12. Bondo

    Help with early 80s mercruiser 140hp

    Ayuh,....... Does that motor have points ignition,..?? Did you service them,..??
  13. Bondo

    Mercruiser Setting Timing on 3.0L

    Ayuh,.... it doesn't matter whether you rotated the motor, or not,.... Now, you must rotate it to Tdc, compression stroke, on #1 to set the valves on #1,.... Then turn it to Tdc compression stroke, on each of the other cylinders,..... I don't like the idea of turning the pushrods to find 0...
  14. Bondo

    Mercruiser Setting Timing on 3.0L

    Ayuh,.... That's perfect,....
  15. Bondo

    73 starcraft old merc to new merc

    Ayuh,.... Around the time yer's was new, the bolt holes moved abit, so you may, or may not need to redrill a couple of holes,..... If you go with the Gen.II, there's two more holes that'll need drilling, you can use the inner plate to locate exactly where,... The tuning I mentioned is...
  16. Bondo

    End of Season oil changes?

    Ayuh,..... I do both at seasons end, regardless the hours run,...... Fresh oil in the motor, so that there's no acids or other crap during the lay-up,..... I do the drive, so that I Know there's no water in the case,....
  17. Bondo

    6.2L MX MPI Stalls when shifting out of gear

    Ayuh,..... Which drive,..??
  18. Bondo

    5.0GXi Starter Replacement

    Ayuh,..... There wouldn't be enough space to slide the starter in,.....
  19. Bondo

    Need some info on adapting a Sierra A1 marine fuel line to a Carter mechanical fuel pump

    Ayuh,....... Have ya got a link, or picture of that fuel line,..?? Sounds like nothing I've run across,...
  20. Bondo

    5.0GXi Starter Replacement

    Ayuh,..... Neither have I,...... Never used a torque wrench either,..... Always set the bolts with my calibrated elbow,.....
Top