Search results

  1. Shifflett115

    1995 mariner 200 hp non efi lost spark

    Ok cool , how would I bypass that circuit
  2. Shifflett115

    1995 mariner 200 hp non efi lost spark

    So the black/yellow wire going to the switch boxes is the kill circuit?
  3. Shifflett115

    1995 mariner 200 hp non efi lost spark

    I have a 1995 mariner 200 hp non efi outboard , I was planing off yesterday and it shut off , like someone turned the key off , it started back up, went to plane off again and did the same thing but it wouldn't start back up , waited a half hour and it started so we limped home at 1500
  4. Shifflett115

    1990 force 120 no spark

    I have a 1990 force 120 with no spark , 150 psi on all cylinders , just no spark , replaced the Cdi boxes , nothing , put another stator on , nothing , trigger ??????
  5. Shifflett115

    mariner 200 hp rough idle

    I have an 1995 mariner 200 carbureted motor , it has a rough idle and runs rough until about 2000 rpms then smooths our , on plane and full throttle it runs perfect , carb issue ?
  6. Shifflett115

    1985 force 125 intermittent spark

    get guys , I have an 1985 force 125 with intermittent spark , it will want to start , then you crank it again there is no spark , where should I start , compression is good , it ran great all weekend last weekend and now this , any ideas ?
  7. Shifflett115

    1995 mariner 200 hp misfire

    Got a 1995 mariner 200 , I have a misfire in cylinder 3 , the compression is good , where do I starry looking ?
  8. Shifflett115

    Year of my mariner 200 hp outboard

    Hey guys I just picked up a mariner 200 hp outboard today serial number 06200901 or 0G200901 ?
  9. Shifflett115

    1990 force 150 pistons

    I have a 1990 force 150 that ate 2 pistons due to the timing going out of wack , I fixed the timing issue so it won’t happen again , here’s my question , I have another 150 block , pistons , can I take two pistons and rings out of that block , hone the cylinders on my other motor and install them ?
  10. Shifflett115

    1976 evinrude 200 short shaft to long shaft

    how much is involved changing an evinrude 200 from a short shaft to a long shaft ?
  11. Shifflett115

    Force 150 fuel pump with spring

    I have a 1990 force 150 , it has duel fuel pumps , the pumps have springs that rest against the diaphragm , my 125 force fuel pump doesn’t have a spring in it , why does the 150 pumps have the spring ?
  12. Shifflett115

    1997 mariner 225 no spark center coils

    Hi everyone , what sends the signal to the coils on a 1997 mariner 225 ? The center coils are not firing , switch the coils and they work on other cylinders
  13. Shifflett115

    1990 force 150 running issues

    I have a 1990 force 150 , compression is great , runs great on all cylinders , wot is about 5000 rpms , once in a while it won’t reach 5000 at wot , why is that ?????
  14. Shifflett115

    Cuddly cabin to bow rider conversion

    Has anyone on here ever done any magothy conversions to their boats ? Thinking of converting my bayliner cuddly to a bow rider , it's an 1985 and I love doing projects
  15. Shifflett115

    Force outboard lower unit shift rod

    Hey everyone i have a 1990 force 150 i just purchased a lower unit for , the shift rod that sticks out of the lower unit has a small bend in it at the top , can i just unscrew it and screw a good one in ???
  16. Shifflett115

    Why am i getting prop slip !!!!!!

    Hi everyone , i have a 1985 bayliner with a force 150 on it , i have a 13 1/2 by 17 pitch prop , my wot rpms are 5500 to 5600 rpms but i am getting prop slip out of the hole , why is that , If i put a 14 BY 19 Pitch quicksilver prop on it i get no slip out of the hole but my wot rpms are way...
  17. Shifflett115

    1985 bayliner , 150 force prop question

    Whats up guys, i have a 1985 Bayliner Cuddy with a 150 force , with a aluminum quicksilver 13.25 by19 pitch prop my rpms are 5900 rpms too high , im looking at a mercury laser 2 13.25 by 22 p stainless prop , im trying to be between 5100 rpms and 5500 rpms wot, with a 22p stainless can i acheive...
  18. Shifflett115

    long shaft 2 piece lower unit on a short shaft motor ?

    A long shaft 2 piece drive shaft lower unit will fit on a short shaft motor right , all i have to do is use my drive shaft correct ? i have a 1990 force 150 20 inch shaft motor with a bad lower unit , i have someone that is going to sell me a lower unit but its from a long shaft motor, both...
  19. Shifflett115

    Force 150 HUGE difference from 125

    I have a 1985 bayliner cuddy , it had a 1985 force 125 on it , the top speed was 33mph at 5000 rpms wot , I bought a 1990 force 150 d model for cheap with a bad lower unit , I put a 176:1 lower unit on it from a 1977 Chrysler 135 , NOW my top speed is 48 mph at 5200 rpms , it acts like a...
  20. Shifflett115

    Strength of a Force 2:1 lower unit

    I have a 1990 force 150 , the original lower unit is bad , I have a 2:1 lower unit off an 1985 85hp lower unit I had on my 125 force , will it hold up to the HP of the 150 until I find someone to rebuild the original lower unit ?
Top