The specs say 1 1/4 turns out for the idle<br />mixture screws. This setting is too lean.<br />After multiple testing, in gear, lowest RPM,<br />the best setting is 2 turns out. the motor<br />now does not stall or sputter. Also acceleration is improved. the idle speed<br />must be set to 1300 RPM (in neutral).<br /> This has been an ongoing problem with all<br />leaner settings not working. Also motor <br />seemed to run abit hot and sometimes stall<br />after coming down from high RPM levels.<br />(when set at 1 1/4 turns)<br /><br />Any responses??? This is my first posting.<br /><br />kcb
