125 merc dies when you hit waves

timmytes

Seaman Apprentice
Joined
Jun 9, 2004
Messages
39
i've covered this before, but my 125 only dies when you slam into waves pretty hard. its not the fuel, its not the carbs. i think this is a different problem than the other guys posts, because their boats miss throughout the rpm ranges. what could i try next? ignition parts, ect.????<br /><br />thanks
 

Chris1956

Supreme Mariner
Joined
Mar 25, 2004
Messages
28,156
Re: 125 merc dies when you hit waves

Tim, It sounds like you have a broken wire in the boat's or engine's wiring harness. You can easily inspect the engine's wiring harness, but the boat's wiring harness is more difficult. I would start the motor on the muffs and then try to make the ignition problem happen by shaking the harness on the boat first and then the motor. Turn the motor left and right, pull on the wires gently etc. I bet it is near the plug on the boat's harness. (I had one there)
 

rickdb1boat

Supreme Mariner
Joined
Jan 23, 2002
Messages
11,195
Re: 125 merc dies when you hit waves

Could also be the kill switch when you hit the big ones. Might check it out. Just a guess...
 

Maximerc

Petty Officer 1st Class
Joined
Jun 26, 2003
Messages
292
Re: 125 merc dies when you hit waves

maybe its the three feet of water coming over the engine..... sorry could not resist
 
Top