Just bent prop tonight that has only been used 5 or 6 times since replacing a "spun" prop. The extra came with the boat which i have had for a short time anyway. Should I have prev. prop with bad hub rebuilt, bent prop repaired, or find new one all together? Both are cheap aluminum props. I recently passed up a prop at flea market for 20 bucks that the guy said would fit. (I dont know enough to tell if it was the right one or not so I passed). If it would be easier/cheaper to get new one, what size, pitch etc. do I need? <br />This is a 67' 50hp merc (ser#: 2119719) on a 16ft alum fishing boat (monarch) with all flooring etc. (in other words pretty heavy for alum. boat) it also has extra runners mounted to each ridge on bottom. <br />Sorry so "wordy" thanks for your help!<br />p.s.<br />I dont mind so much all the specifics about hole-shot, max speed and all of that, just general range that will work.(if that is reasonable)I am new at this stuff 