ewalden444
Seaman
- Joined
- Aug 18, 2005
- Messages
- 63
Hello All,
quick question. I have a 1970 Johnson 25ph motor. It has been sitting for 15 years unused. I'm stating to work on it to see if it will run.
I took the carb off and soaked and blow it out with air. Check the float, order a rebuild kit.
I put the carb back on to see if it would fire. I check and cleaned the spark plugs.
Checked the fuel lines to the carb. I'm getting gas to the carb. But it will NOT fire.
I took the top plug out and put some fuel in the cylinder. It fired and pudder for 5 - 10 seconds.
Am I wasting my time on this engine? Please help.
Also, I have ordered a new impellor and pull handle.
Thanks
quick question. I have a 1970 Johnson 25ph motor. It has been sitting for 15 years unused. I'm stating to work on it to see if it will run.
I took the carb off and soaked and blow it out with air. Check the float, order a rebuild kit.
I put the carb back on to see if it would fire. I check and cleaned the spark plugs.
Checked the fuel lines to the carb. I'm getting gas to the carb. But it will NOT fire.
I took the top plug out and put some fuel in the cylinder. It fired and pudder for 5 - 10 seconds.
Am I wasting my time on this engine? Please help.
Also, I have ordered a new impellor and pull handle.
Thanks