1971 Penn Yan stringer

[Rob110911]

So ripping out the floor or what's left of them dose any one know should I replace the stringers and leave it or should I put more reenforcements in this is my first time rebuilding a boat from the hull up any input is appreciated

 

[kcassells]

Try to put back like what came out. More pics needed.
Plywood cut to form stringers. ACX, BCX, CDX are commonly available. Acx being the better of the three cause of less voids. NO TREATED ply or lumbers.{The green stuff}
Then their is marine grade and a bunch of alot more expensive products.
Welcome aboard.

 

[Rob110911]

I will add more pictures when I get home from work it looks like 2x2 and a 2x6 were used all vertically placed no cross members and some really awful glass on it