roscottjr
Petty Officer 1st Class
- Joined
- Jun 10, 2006
- Messages
- 330
I have a 1971 Evinrude 60hp Model 60173C. Anyone have any tips, advice, suggestions, etc on this engine? Here is what I know so far:
Needs rectifier
Needs spark advance linkage rod
Needs starter
Needs water pump
Needs lower unit resealed
Compression 148-150 psi on all 3 cylinders (tested engine cold, no fuel)
I need to know where the 2 yellow wires from the stator connect to.
I also have a 1964 Johnson Meteor 90hp V4 Model V4ML-10R. Tips, advice, suggestions, etc here as well. Here is what I have on this engine so far:
Currently rewiring entire engine
Modifying chargeing circuit (thanks to iboats member Droll)
Needs water pump
Needs lower unit resealed
Compression 115 psi both top cylinders, 105 psi both bottom cylinders.
Almost all of my current information has come from Droll.
Any other input or information on these 2 engine will be greatly appreciated. I currently own 1 boat but might get a second for whichever engine I dont use on the boat I currently own.
Robert
Needs rectifier
Needs spark advance linkage rod
Needs starter
Needs water pump
Needs lower unit resealed
Compression 148-150 psi on all 3 cylinders (tested engine cold, no fuel)
I need to know where the 2 yellow wires from the stator connect to.
I also have a 1964 Johnson Meteor 90hp V4 Model V4ML-10R. Tips, advice, suggestions, etc here as well. Here is what I have on this engine so far:
Currently rewiring entire engine
Modifying chargeing circuit (thanks to iboats member Droll)
Needs water pump
Needs lower unit resealed
Compression 115 psi both top cylinders, 105 psi both bottom cylinders.
Almost all of my current information has come from Droll.
Any other input or information on these 2 engine will be greatly appreciated. I currently own 1 boat but might get a second for whichever engine I dont use on the boat I currently own.
Robert