I forgot to transfer the pictures from the phone to the computer so I'll give some descriptions on what I'm going to be working with here. After I got the boat I found that the floor was starting to crack up in the front just before the bow seating area. So I've already placed a new sheet in place, and just put some porch paint over it to hold out the moisture for a bit. Now that piece will be removed, and an actually replacement sheet will be put in place once I get to working on the inside of the boat. I just more less wanted to make it so the floor will hold to for a couple months. With my job I only got 2 days a month I can take her out on the water.
The boat right now is white bottom side with an olive green topside. The topside paint all together is extremely ugly, and I'm going to be repainting the entire boat Jet Black. Which I'm purchasing all the painting products from this site. I'm going to be adding some graphics to the side of the boat as well, but as I'm working through the process of this rebuild I'll be able to decide on the graphics I want to have. The inside of the boat will be a dark grey color with the floor, seats, panels, etc. I think the dark grey and black will work together greatly. The Evinrude motor which was painted to match the topside color of the boat is going to be repainted a black color.
I'm going to be installing a power trim/tilt system on the boat so I can get away from this manual trip. It's not always that easy to adjust the trim then your in the water. There is some coves that I'll be going in that the motor will have to be raised when anchored, and as well for hauling on the trailer so it's easier to put the transom saver on the motor from the trailer.
