1978 Chris craft 281

[Redduck]

We have 2 Marine Power FL15 181 3LTR engines out of our 1978 Chris Craft 281. Trying to locate the following parts:
1) Set of rod bearings .020
2)Set of main bearings .010
3)2 starters
4)2 sea pumps
5) 2 alternators
6) 2 fresh water circulation pumps
7) 1 90 degree exhaust elbow

We called Marine Power. They say our serial number and model number don’t show up in their books??

Can anyone advise where we might get these parts?

 

[Scott Danforth]

The motors are GM industrial motors

Bearings see your local NAPA. Get clevite

Starters, any marine starter source. Same as alternator.

Sea pumps. Determine who's pumps. Most likely jabsco or Johnson

Circulation pumps. Any pre 1991 3.0 marine pump

Elbow.... That may be generic. Post pics of motor with manifold and elbow

 

[Redduck]

The motors are GM industrial motors

Bearings see your local NAPA. Get clevite

Starters, any marine starter source. Same as alternator.

Sea pumps. Determine who's pumps. Most likely jabsco or Johnson

Circulation pumps. Any pre 1991 3.0 marine pump

Elbow.... That may be generic. Post pics of motor with manifold and elbow

Hi Grumpy! Tks so much for your feed-back, most helpful. Any chance of you contacting me direct? Sounds like you have been there done that. My No is 830-220-0020

 

[Scott Danforth]

Ask questions in the open forums