1978 johnson 70hp tilt with no pressure

[tstobber0]

I have a prestolite valve body I'm trying to rebuild. From my research, there's a piston that needs an oring changed but can't figure how to get it out and trying not to break it. There was snap rings on both sides that I removed. Also not sure about the check valve balls since they fell out when I took it apart. Any help is very appreciated!

 

[tblshur]

tstobber0 u might look at a parts diagram and see what you need :joyous:

 

[tstobber0]

Parts diagram LOL. Only shows the valve body

 

[tstobber0]

http://www.marineengine.com/parts/j...bly+70+-+140+Hp&yid=34192&mid=34197&sid=36355

 

[tstobber0]

link not working for some reason. But on any parts diagram it does't show the guts

 

[tstobber0]

take it nobody knows?? Thinking about pressing it out but like I said, really don't want to damage it. Hard to find old parts like this..

 

[tstobber0]

Was able to get it apart.... Had to put it back together, plug where lines would go and blow with compressed air. Hopefully this helps someone in the future!!

 

[tstobber0]

Still having issues here... I replaced the inner check valves with new ones(couldn't find the seal online) and same issue- NO PRESSURE! HELP!!