Howdy folks so my force engine was running great, then I took it out onto the water the other day and the starter was acting like the battery was dead and would only turn enough to engage the bendix and then die. I thought it was the solenoid and replaced it and then nothing was happening, i would turn the key and the starter had no life at all, I looked at the neutral saftey swith and even bypassed it .. nope that wasnt it. When I jumped the starter to the battery or toched the solinoid terminals together with a screw driver the starter would fire up easily so I knew it wasnt the starter. I eventually traced the yellow wire back to the key ignition swith an accidently touched the red and yellow wires at the back terminals together and the starter kicked on an engaged the flywheel ..... Thats IT !! I replaced the key ignition and now the starter turns the flywheel like a CHAMP !!! but I cant get the engine to catch and turn over now ..... arg ! I dont know if when I was troubleshooting and bypassing I may have killed the circuit breaker switch? the reset button is sticking out a little but its loose and I can push it in but it doesnt stay depressed or go flush. I dont know if its supposed to be flush when its been reset ?? The next thing is where do I take my trouble shooting next?? Help!!
Thanks
Thanks
