ahollobaugh
Recruit
- Joined
- Jun 16, 2008
- Messages
- 4
I have a 1985 Mercury 60 hp 3 cylinders. It has 55 hrs on a rebuild and new switch box and 5 hrs on a new stator and plugs. It starts and idles fine but stalls out when I start putting the fuel to it at about 2500 rpms under load. With no load it will rev up but slower than normal. Compression is good and I could not find any loose wires from the stator replacement. It was running perfect 2 weeks ago. I took it out Saturday and it was a problem right away. The voltage is charging high now 15.5 - 16 v 4000 - 5000 rpm no load. It was 13.5v last week. Any suggestions would be appreciated.