While looking in the forward deck access cover to see if there is a fwd bilge pump (there's not), I noticed what appeared to be a "thin" area in the bottom centerline of the boat. I could see a little light from the outside. Can this be repaired with fiberglass, or is this even a problem? I want to make a windshield
maybe put a hardtop on the boat (saw them ina picture). Is 1/4" plexiglass sufficient for the windshield or should I use 5/16 0r 3/8? Thanks for any info.
maybe put a hardtop on the boat (saw them ina picture). Is 1/4" plexiglass sufficient for the windshield or should I use 5/16 0r 3/8? Thanks for any info.
Last edited by a moderator: