BlackoutBill21
Petty Officer 2nd Class
- Joined
- Dec 10, 2016
- Messages
- 181
Its a Force but it says made by mercury Marine. Anyway its a single cylinder, 5 hp force 5. I finally got it running but it hard stalls after like 5 minutes.
Main issue, i cleaned the carb good, now it stalls out when i put my finger, or the primer button, on the fitting. Whats the deal with that? if i leave the button tube off it idles fine. Its the hole right next to the idle needle on top of the carb. carb pictured below in link
Main issue, i cleaned the carb good, now it stalls out when i put my finger, or the primer button, on the fitting. Whats the deal with that? if i leave the button tube off it idles fine. Its the hole right next to the idle needle on top of the carb. carb pictured below in link
Last edited by a moderator: