Re: 1989 Ranger 363V --- Seat Removal?
How do you remove the bench seat on this model to get at the fuel tanks?:
There should be 5-6 bolts that feed horizontally into the hull. They were kinda hard to find b/c there were some plastic covers on them that match the carpet. They are simple wax covers, so no big deal if they don't go back on. I'm working on an '89 361V, and the whole bench was one piece of fiberglass that came out, seats attached, and the seats just attach to the bench part. Be careful removing the seats from the bench. I would only do it if you absolutely have to. Looks like we'll have to do some touch up fiberglassing to get the seats back on, or some "southern engineering".
