Jason in washington
Recruit
- Joined
- Jul 2, 2003
- Messages
- 1
Hello all, <br /> I could not find any posts with the exact problems I am having so here it goes:<br /> I bought a boat with a 1992 force outboard, it ran good off the bat, but it smoked quite a bit, then after a day on the lake, I was flushing the motor and it died. Come to find out a magnet had broken loose and caused my stator to go bad, I updated to the "RED" stator and it ran again, but it still smokes pretty bad. I am mixing 50:1, but if I let the boat idle, the plugs will foul and I will have to remove them and clean. I have checked compression and all cylinders are within 10 psi of each other at about 120 psi. any suggestions would help. <br /> Thank You