1992 johnson gt200

[rb215]

been having problems with no bottom end power had some one rebuild carburetor found out today the two jet in front of carburetor on number 5 cylinder was switch orfice #36 on top hole and #28 in bottom all other carb seem to be correct would this cause motor to not turn or 5000 rpms and be bogging down when trying to get on plane out

 

[Bosunsmate]

swap them back and see
Its a diy job
if its not the problem do a compression check

 

[boobie]

Edit.......

 

[Faztbullet]

would this cause motor to not turn or 5000 rpms

Nope....

 

[rb215]

Well just to every one know the jets that where switched on #5 carb was the problem put them back like the other 5 carbs boat back to running great Does not boog down jumps on plan like always rpms back to normal

 

[Faztbullet]

Those are the intermediate jet and idle jet...totally out of fuel circuit above 3000 RPM. Only thing it would cause lean snneze at idle.

 

[rb215]

Well the only thing i know is i have had two different people working on this motor and this is what i changed and it ran great after that so thanks for your input i,m running great now