I have had my deckboat for 14 years... it's been good but is now starting to give me a few problems. Most major problem is the bilge pump. It is an Attwood v625. Motor works and the shaft spins, but it will not pump any water. I pushed a piece of wire through the port where the water exits just to make sure no mud dabbers were nesting. Any suggestions what to check or a replacement pump that will fit in the existing attwood mount?
The other problem is the aerator pump. I just quit working, does not hum or anything. its an Attwood 500 aerator. It looks like it has to be completely removed to replace ( unlike the bilge cartridge). Both are very difficult to get to- imagine that.
Any advice? Thanks....
The other problem is the aerator pump. I just quit working, does not hum or anything. its an Attwood 500 aerator. It looks like it has to be completely removed to replace ( unlike the bilge cartridge). Both are very difficult to get to- imagine that.
Any advice? Thanks....