1995 Crownline 250 CR Bravo 3 props

tjdtototu

Recruit
Joined
Apr 12, 2015
Messages
1
I just purchased a1995 Crownline 250 CR 7.4 Ltr Bravo 3 300 HP . It is in great condition, however, the Bravo 3 stainless props are in very rough shape. I need to place an order to buy new ones. What was the O.E. pitch and diameter for this set up. I need to buy ASAP, please advise what will be the best set up on this cruiser and where to buy the dual props.
 

Maclin

Admiral
Joined
May 27, 2007
Messages
6,761
Best first thing to do is remove them and look for the numbers on what you have now. Then order new if you must, then try to get these refurbed.
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,258
I just purchased a1995 Crownline 250 CR 7.4 Ltr Bravo 3 300 HP . It is in great condition, however, the Bravo 3 stainless props are in very rough shape. I need to place an order to buy new ones. What was the O.E. pitch and diameter for this set up. I need to buy ASAP, please advise what will be the best set up on this cruiser and where to buy the dual props.

Ayuh,.... Welcome Aboard,...... Like Maclin says, Pull yer props, 'n look to see what the sizes are, it's stamped right into the props,.....

You'll have a better chance of walkin' on water, than findin' out what props were on it the day it left the dealer's,.....
 
Top