So today I took the boat out for a couple hours and noticed at bout 3-5 mph when I trimmed down it made somewhat of a noise that it normally doesn't make, but trimming up it didn't make that noise. So I gave it WOT and as I'm getting it on plane i noticed it wasent really trimming up like normal, when I say normal I can trim it up to much and the front bounces then I trim down just a little and it's where it needs to be. But It wouldent trim enough to start bouncing but it was trimming up enough to get to the normal MPH It normally runs. I had my passenger watch the motor to see if it was coming up any and it wasent but it would trim down. I'm guessing this has something to do with that noise it was making at 3-5 mph when trimming down. But when the boat is not movin it trims up and down just fine and even on trailer it acts completely normal it only acts up when there is pressure against the motor. Where should I start looking to figure out what's going on? Thanks in advance
Last edited:
