1995 Johnson Fast Strike no power to tilt/trim or key switch

Joined
Apr 18, 2020
Messages
16
New post ... new problem! While checking the connections on the key switch I touched the screw driver to one of the other connections on the switch and seen a spark come from it. I now have no power to the switch or tilt / trim on the motor. Thinking that maybe I shorted the switch out I replaced it with a new one and still no power. I've traced power from the battery to the starter and have power to the 2 relays. I changed one of the relays with a new one thinking it may have blown one of them but probably not both. Does my power to the switch come from these relays? Is there another possible inline fuse I should be looking for? Oh by the way I have checked the kill switch, the motor will not even turn over. As always I appreciate the help and knowledge that y'all give.
 

Wide_N

Petty Officer 2nd Class
Joined
Jul 14, 2015
Messages
133
There should be a fuse on the red line coming off the post where your positive battery hooks up to the solenoid.
 
Joined
Apr 18, 2020
Messages
16
Found the fuse(was right in front of me) It was blown(AGA20) put another one in and I have power to the tilt/trim and on the switch now. Thanks for the help.
 
Top