1996 Johnson recirculation hoses

Bareil

Recruit
Joined
Jul 9, 2020
Messages
3
Hi all,

I changed the spak Plug on my "new" 35 hp 1996 outboard motor and saw that some plastic hose were melted.

Those are the recirculation hose I think.

​​​​​​​Want to replace them but do not know where to plug things.

There is 2 ports on each cylinder, but the top. There is a single tee remaining at the bottom to connect with the primer?

Primer hose seems to only be going to top cylinder.
 

Attachments

  • photo334737.jpg
    photo334737.jpg
    1,019.4 KB · Views: 5

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,881
The factory manual does not even show where the hoses go.----The primer valve only has one hose coming off it so it only goes to one location on the motor.----Oh----I have about 10 of these motors for rebuild / parts.----Your location ??
 

Bareil

Recruit
Joined
Jul 9, 2020
Messages
3
I was able to figure it out. Using the part list. (See attached screenshot)

The #3 is the bottom cylinder and #1 the top one. Each cylinder has a both a check valve and an elbow.

The length in mm are also correct.

Thx for your help.
 

Attachments

  • photo334815.png
    photo334815.png
    146.9 KB · Views: 4
  • photo334816.png
    photo334816.png
    73.2 KB · Views: 4
Top