1996 merc repiar problem

[-onthefly-]

I have a 1996 60 horse, 2 stroke mercury -model 10604- serial# og297739. It is knocking and tempo of knock increases with rpm. I have been told that some years of merc were built with "closed seal" making access for repair nearly impossible. Anyone know if this is the case? Any suggestions? Thanks. Perry

 

[Dhadley]

Re: 1996 merc repiar problem

Hummm...... They offer replacement pistons so a total rebuild must be possible. Besides, someone had to assemble it to start with.<br /><br />All kidding aside, some motors were produced without a removeable head so the access is somewhat more difficult but not impossible.<br /><br />Good luck!

 

[-onthefly-]

Re: 1996 merc repiar problem

So, Dhadley...<br /><br />I am now in the predicament of either having some work done on said motor, or I am also looking at a rebuilt 80 horse merc. Judging by the knocking sound I have described (and considering the increased difficulty in accessing the 60) what would you say I would be looking at to fix the 60? I am more adept at putting out a fire than I am at fixing a motor... <br /><br />Thanks for the response. Perry mfirefish@hotmail.com