1998 115 carb jet?

[jeremy5780]

I have a 1998 115 evinrude crossflow i rebuilt.I had all 4 cyls bored 30 over. I read a remark on this thread that I should up the jet size by two. I currently have the stock one in and it seems to run and idle fine. Any thoughts?

 

[Faztbullet]

Re: 1998 115 carb jet?

If I rebuild a customers engine and its .015 or .020 oversize(cast pistons) stock will usually be ok .If customer uses forged pistons it goes up 1 size at .020 and if its .030 or more I rejet 2 sizes. Your motor should have 58D stock jets and the 60D is part #332204