GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
See attached pic of one of my carbs, below the jet is a needle, is that high speed needle? do i need to back it out and clean inside it also? cleaned carbs/needle seat etc then saw this. upon reassembly
thanks
Every owner jumps all over the carburetors.----What other trouble shooting have you done ?----Pushing the key in while cranking it over ?----Checked for spark ?
compression is 120 on all 4, all 4 sparking, fuel tank had old gas with water, cleaned carbs, fuel line in a nurse tank with fresh gas, fire off but dies immediately
if i hold the key in too long, it cranks and revs too high