1999 5.0GiPWTR Looking for new injectors

Dwayne_G

Cadet
Joined
Apr 17, 2016
Messages
8
Does anyone know of a good drop in replacement injector and source for a 1999 5.0GiPWTR? I need a couple. Mine are bad. They are not opening. I sent them off to be cleaned because one was spraying awful and they both came back with the same problem so now i'm looking for replacements. The part # stamped is 25170301-ACR (GM 1119). I've been searching for hours. I seen a few options on EBay, but I'm afraid to purchase them because I'm not certain they will work. This is a high pressure system with two fuel pumps. The high side valve approaches 30 PSI. ECM is 50TBI/99US01 AY 3858338 DELPHI 16237009 867009KA00023978
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
43,216

Dwayne_G

Cadet
Joined
Apr 17, 2016
Messages
8
Well I sent the injectors out to be cleaned again. Both of them were stuck. They are working now. I thought I'd update the post with the flow information in case someone else can use it. They were 640 cc @ 15 PSI and 1050 cc @ 30 PSI.
 
Top