1999 ficht 200hp where does this go?

[rjcamel2355]

Can anyone help me locate where this wire goes? Its a red wire with ring terminal all by itself near the fuse block and the oil pump. I can't for the life of me figure out where it goes there doesn't seem to be anything missing a connector. But I don't want to fire it up with something unhooked.

http://imgur.com/GmHWqUh

 

[rjcamel2355]

Answered my own question.... makes no sense to me why a 12v wire screws into something like this.... but.... go ficht.... :/


http://imgur.com/a/8opfh

 

[daselbee]

It is a pigtail to +12v for the addition of an accessory off-board charger system that they sold and no-one bought.....

 

[rjcamel2355]

Sounds about right..... One.. maybe two more stupid questions.

I had to disconnect the two hoses going to the oiling system one fitting is labeled "oil supply" I assume the hose from the oil tank connects here, There is a fitting just next to/behind that, where exactly does the hose that connects to that come from/go to?

 

[daselbee]

Let me answer for a 2005 model. The 1999 might be the same. Pretty positive it is. You see the oil inlet. Then there is the oil return. The other two lines you see will be short, and they go to fittings on the block. They provide pressure pulses to drive the pump. Two of them. One goes to cylinder 3 ant the other to cylinder 5.