OK. Ive got a 2002 Johnson 115hp 4 cylinder 2 stroke motor. Ive got it on a 18 foot 1994 Robalo. I just got this boat and it has been sitting for over 6 months to a year. Could be longer. The boat started up with a little starting fluid at the house. I let it run for about 5 min. and it seemed fine. I took it out to the bay today for the first time. It started up fine at the dock. Ran it out for a few min. and started to open it up. Then it just throttled down all by its self. Then started to make a weird noise. Almost like knocking. But different. Headed back in at idle. Then it died. Found out there was water only on the spark plug in the top right cylinder. Took it home to run it. And now it seems like prop won't move in gear or at the flywheel. Starter engages but the flywheel seems stuck.
I put a new water separator in before I took it out.
I figured water in gas. But not sure why that would make the motor get stuck.
Any Ides..... ?
Thanks, Ollie
I put a new water separator in before I took it out.
I figured water in gas. But not sure why that would make the motor get stuck.
Any Ides..... ?
Thanks, Ollie