I am going to replace the impeller on a boat I just bought. Its a 2007 seaswirl 190 br sport. The previous owner never had it replaced. The boat has about 50 hrs on it so I figured I should put a new one in. The problem is that I cant figure out how to remove the housing bracket that is attached to the front of it. The motor is hard to work on behind the seat so I want to make sure I can do it before I tear everything apart. Its supposed to be fairly easy I think since its a service that should be done every 50hrs according to the manual. It looks like it might be pushed into a bushing that the housing will just pull off
.
.
.
.
Attachments
-
21889_1.png -
21889_1.png -
21889_1.png -
21889_1.png -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
2012-09-15_12-09-01_867.jpg -
22129_1.png -
22129_1.png -
22129_1.png
Last edited:
