JB GRYPHON
Cadet
- Joined
- May 31, 2011
- Messages
- 6
Last post update... Was having drive issues, discovered that coupler from engine to drive had stripped out. Had to pull engine. Replaced coupler. Now that all is back together, but steering is very jerky (pulsating), fluid has been topped off, ran & turned steering to work out air bubbles but still jerky....
Wondering if there is possibility i connected the ps lines wrong on the ps actuator (quick connect) i have the pressure line on the front (towards bow) connection on the actuator........or is there a special operation to bleed the ps system......also if it matters i use atf dexiii in ps system......
Wondering if there is possibility i connected the ps lines wrong on the ps actuator (quick connect) i have the pressure line on the front (towards bow) connection on the actuator........or is there a special operation to bleed the ps system......also if it matters i use atf dexiii in ps system......
