2009 etec 90 seems fuel starved

JohnnyO3

Cadet
Joined
Jul 24, 2020
Messages
6
90 etec starts up fine and idles for a few minutes then stalls and is hard to restart. Could it be the VPS getting hot?
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,881
What is this VPS ?----How did it run last week ?----Checked fuel filters ?-----Checked / load tested your battery ?------Is this a new installation ?
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,881
I doubt that the ---VAPOUR SEPERATING TANK ----gets hot.------Provide more history here or simply run to a qualified shop to get this computer controlled machine fixed.
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
there are two pumps on this... a lift pump and the high pressure pump. Does it do better if you continually squeeze the bulb? Are you getting any flashing lights on the system check guage?
 

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,810
VST may not get hot but the VST filter can plug up carefull removing the clip the VST barbs are very fragile


filter is a fine mesh at the bottom of the VST degraded hoses particles can plug it up fast restricting fuel flow
 

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,810
see part #7 in diagram AGAIN... don't crack the barb on the vst if you decide to inspect it
 

Attachments

  • photo338008.png
    photo338008.png
    84.5 KB · Views: 0
Top