2010 SeaRay Engine low voltage

[carenter]

I have a friend with a 2010 SeaRay. He is getting a code 209 engine low voltage. Every thing comes on but engine will not start. It will not even turn over. We have checked all the fuses, battery is fully charged. gauge show 12 volts but battery has 12.67 volts. Please help

 

[Bt Doctur]

Re: 2010 SeaRay Engine low voltage

does it do anything or make any sounds when you turn the key to start?
do the gauges operate in the "on" position?

 

[Don S]

Re: 2010 SeaRay Engine low voltage

going to need some engine and drive info. What your boat is means nothing.
What engine, what drive? Serial numbers are almost mandatory with some questions, especially if you are looking for code numbers.

 

[dingdongs]

Re: 2010 SeaRay Engine low voltage

Check for clean ground and power supply to starter motor.Are the cables tight on starter?

 

[carenter]

Re: 2010 SeaRay Engine low voltage

He has a merc I/O with bravo 3 out drive. It also has smart craft on it. That's what is giving me the code 209. We have checked all the wires today. All are tight. Gauges come on when when key is on. But will not turn over just keeps beeping. And will not turn over. Not even a click from the starter colenoid.

 

[Don S]

Re: 2010 SeaRay Engine low voltage

Thank you for all the wonderful engine information. :facepalm:

 

[dingdongs]

Re: 2010 SeaRay Engine low voltage

jump the solenoid large posts with wrench to see if the starter will swing the engine over.it may be fubar

 

[carenter]

Re: 2010 SeaRay Engine low voltage

The engine is a fuel injected 350. that in all i know about the engine. the boat has push button start. i will call and ask today.