GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
I have always adjusted 3.0 valves with 3/4 turn of adjuster. On a couple of new boats I lose compression when doing this. Have specs changed? Or have I gotten some bad copies of this engine?
It's still 3/4 turn once zero lash is found. Many folks mess up by tightening until the turning stops, then give the 3/4 turn. You turn the push rod in your figures to start, but the important move is the up/down movement. Once all up/down movement is found this is zero lash. The push rod can still be turned at this point. So long as the lifter has not collapsed your good
