25 hp mercury outboard

Joined
Feb 22, 2012
Messages
7
My friend recently acquired a 25 hp mercury outboard with a quick silver control we are attempting to get it running to see what it may need there is no kill switch but everything else appears to be there, can we bypass the kill switch temporarily just to see if the engine runs? If so how ? And would the kill switch stop it from turning over or do i have another problem ? The motor I believe is a 1982 the serial# 6055608 was all I could find and the control is a Quick silver but the only numbers I can find are in the casting on the inside they are 85892 it has a four prong plug at the front, the key at the rear near the top, and a choke switch, with a throttle only button and no trim. any help would be greatly appreciated.
 
Joined
Feb 22, 2012
Messages
7
Re: 25 hp mercury outboard

Yes it is a 1982 and is a model:

1025502 MERCURY 1982 25

Parts Listing:

http://www.crowleymarine.com/mercury-outboard/676.cfm

Service Manual: 90-92235--1

http://www.ebay.com/itm/Service-manual-18-25-see-desc-serial-/370353980784?item=370353980784&vxp=mtr

Strongly suggest you get this manual ASAP as it won't last that long at that excellent price.

Gerry

Ok i got it wired up and yes i bought the manual so thanks for that find !! and any way started up, ran pretty good for a few minutes shut it off and now doesn't seem to be getting any fuel, if i put my hand over the carb( choking the crap out of it ) and squirt a little fuel in she fires up and runs as soon as i take my hand away it dies I'm thinking fuel pimp sound right any one got suggestions
?
 

Mi duckdown

Commander
Joined
Apr 14, 2007
Messages
2,575
Re: 25 hp mercury outboard

Rebuild the carb, pump and enricher. Bout 75 bucks in parts. And dont forget the water impellar another 25 bucks
 
Top