3 Pin Test Harness for charging coil

[George Budziak]

Where on the web can I find a 3 Pin test harness for testing the charging coil on my 2003 - 90 TLRB Yamaha outboard?
The official Yamaha web site doesn't list any special tools that their manuals call for.
the part # in the service manual is : YB-06443/90890-06757

Thanks, GB

 

[JUSTINTIME]

Re: 3 Pin Test Harness for charging coil

no need for it
you need a dva instead

 

[rodbolt]

Re: 3 Pin Test Harness for charging coil

it has to be ordered through a dealer from K&L tools.
however straighten out some paper clips, insert them in the wires from the aft side of the connector, do your checks
they give both unloaded, and loaded specs on the lighting coil output.
carefully slip the pins between the wire insulation and the water proff rubber grommet until the pin hits the metal connector, DO NOT pierce the insulation.

 

[JUSTINTIME]

Re: 3 Pin Test Harness for charging coil

DO NOT pierce the insulation.

unless you want to buy a new parts!