50hp force 92-94 no fire

[Seanymph11]

So I have a 50hp force 1992-1994 model. I had it out on the river and the outboard was doing just fine. Then I started it up and was idling it and it shut off and wouldn't crank back up. I got home replaced the spark plugs and it started up again. So I took it back out the next morning and it wouldn't start again. So I got the spark tests from the coils and nothing on either one. I've since then replaced the gas the coils the cable from the coils to the plugs and still nothing all it will do is turn over but not fire up. The only other thing I have seen anyone talk about is the power pack and just wanted other options before I spent the money replacing that.

Any other suggestion?

Thanks again

 

[jerryjerry05]

Re: 50hp force 92-94 no fire

Outboard ignition . com
CDI electronics both have test procedures for the electrical system.
I usually replace all the wire end connectors and then try again.
Sometimes it just a bad connector.
Your kill switch working ok?

Profile, location?? You might be close to someone who can help??