'76 evinrude 115HP / need remote control/help

[justinlee0]

the key is broken off in the igintion. it will turn to the start position and back to the on positin, but still nothing happening with the motor... i'm looking for any parts/suggestions/wiring diagrams or information/or just anything that anybody may have run into before.. thanks..

 

[tashasdaddy]

Re: '76 evinrude 115HP / need remote control/help

look for a red inline fuse holder near the starter solenoid. it has a special 20 amp fuse that controls the starting circuit, and ignition. look on the switch face, for a number, that is the key code for the key, you can have a new one made, or order one. dealer may have one.

 

[justinlee0]

Re: '76 evinrude 115HP / need remote control/help

thanks alot... i'm having trouble getting the remote control case disassembled. i can get the throttle handle, front casing, and cold start lever off but i still can't get to the ignition switch. are there screws on the back of the casing next to the sidewall/hull of the boat? and will this release the rest of the upper front casing/housing??

 

[tashasdaddy]

Re: '76 evinrude 115HP / need remote control/help

sure are, you have to dismount the control.