79 johnson 100hp t/t junctionbox

[80rangerbass]

i got a new to me t/t unit (2-wire) because theperson i bought the boat from removed the unit that was on the boat. the wire harness is there and so is the junction box but it seems like it is missing the solenoid from the box, also from what i've read so far the solenoid type was used on three wire t/t units. so where can i find the correct junction box/relay box for the two wire setup. thanks for your help ahead of time.

 

[Joe Reeves]

Re: 79 johnson 100hp t/t junctionbox

The two wire electric motor PTT setup incorporates two small relays within the rectangular junction box, not a solenoid. Is this the junction box that you have?

 

[emdsapmgr]

Re: 79 johnson 100hp t/t junctionbox

Did you check Ebay?

 

[80rangerbass]

Re: 79 johnson 100hp t/t junctionbox

no i believe the junction box i have used to have a solenoid in it. i believe the original ptt was a three wire. will i have to change the controls also?

 

[80rangerbass]

Re: 79 johnson 100hp t/t junctionbox

ok so i got a relay/juntion box off of ebay for 50 bucks and a t/t switch that mounts to the steering wheel also cause the one in my controls is bad and sticks. is there anything else i need to aquire to get this set up and working?