92' Force 50hp has no spark in one cylnder,,,

[Timwelder]

92' Force 50hp has no spark to one cylnder. Serial # OEC02728... I swaped leads going to the coils to see if the coil would fire an it did.. So I assume it's in the green/white wire before the coil.. I had the stator an CDI changed out last yr. Please tell me it's not that again. Marina charged me $650.

 

[Timwelder]

Re: 92' Force 50hp has no spark in one cylnder,,,

still hopeing someone has some advice

 

[rottenray6402]

Re: 92' Force 50hp has no spark in one cylnder,,,

I did some work on a 50hp awhile back with the same problem. Turned out to be a separated ground wire. The wire part was broken but covered with insulation so you couldn't see the break. It was on an older model but still could be suspect on yours?