saxrulez
Petty Officer 1st Class
- Joined
- Apr 10, 2010
- Messages
- 286
The motor trims up and down 100% normal while idling around up to around 50-60% throttle. Once I'm up at full cruise speed or so(20-25mph) the motor will only trim up and will not trim down. It also makes a pretty terrible noise. Once you slow back down to ~10-15mph you can trim down normally again.
So in short:
Motor trims up normally in all conditions
Motor trims down only when not under too heavy of a load and normal with less than 50% throttle or so.
Where should I start?
So in short:
Motor trims up normally in all conditions
Motor trims down only when not under too heavy of a load and normal with less than 50% throttle or so.
Where should I start?