Okay, I cleaned my carbs over the weekend (including the micro filters located inside the carbs). I put it all back together and took it out. At low rpm the thing ran great however, it cannot maintain full throttle for very long before it seems to bog down and die. When it dies I pull the choke and it fires up right away, every time. I brought it in after a short run and my wife took it out briefly. It bogged down for her too but never died.
This is what I did with the carbs when they were out. I cleaned the micro filters, took carb cleaner to the carbs. I inspected the diaphragms and did not notice any stiffness or holes in them. One of the micro filters did have debris in them. I cleaned it and put it back in.
Unless I should have replaced the diaphragms regardless of how I thought they looked I can?t think of what is wrong with the thing. Do I need to adjust any of the settings on the carbs themselves??
Any thoughts or guidance with this issue would be greatly appreciated
Thank you

This is what I did with the carbs when they were out. I cleaned the micro filters, took carb cleaner to the carbs. I inspected the diaphragms and did not notice any stiffness or holes in them. One of the micro filters did have debris in them. I cleaned it and put it back in.
Unless I should have replaced the diaphragms regardless of how I thought they looked I can?t think of what is wrong with the thing. Do I need to adjust any of the settings on the carbs themselves??
Any thoughts or guidance with this issue would be greatly appreciated
Thank you