hello all, ive posted on here before about my motor bogging all the time just at take off. on motor before it didnt matter if it was cold on not, could of just run in from islands which is about 20 minute run and if stopped for a minute in idle then go to take off sometimes would just bogg for a bit not going over like 2800 rpms. pretty much fixed that issue cause of over charging, replacing regulator rectifiers. read on here before i fixed my problem that somebody was having same issue as me but only doing it when motor was cold. before on my motor didnt matter if cold or not when running good i could full throttle it right away and it would jump and run. now if i let it warm up good i have no issues runs great. couple times just testing it if i didnt let warm up good but still starting it and idleing for 2 minutes then full throttle it would just bogg, but when it warms up going down bayou and i full throttle it, it will do fine jumping up and running. MY QUESTION is this i dont mind letting it warm up before i run it hard but was wondering if anybody could tell me why it is doing this now? didnt know if my theromostats were keeping it to cool or what was the deal? like always thanks in advance ted
