I have a real head-scratcher here, for me anyway. Start of the day, tilt/trim was working fine. Once I flushed the motor, I could not get it to tilt back up. Down works fine. So I thought maybe the relay. I swapped relays, but it still didn't work, eliminating the relay question. I started checking voltage at each connection upstream, and I discovered something I didn't expect. The up relay is getting 3 volts from the switch, not 12, not zero. I checked input at the switch on the motor, and the switch is getting 12 volts in, but only 3 volts out. I am guessing I need a switch, but the switch at the helm stopped working at the same time. I can't see a reason why both would quit and one is getting 12v and giving 3v.
I'd love to hear input on this. I will keep testing and post what I find.
I'd love to hear input on this. I will keep testing and post what I find.
