Alcan I have just one more question

S

swellcat

Recruit
Joined
Oct 11, 2003
Messages
5
In regards to the 1970 Chrysler 3.6 hp 32HA. <br /><br />Ok I got it running and I just have one final question should the "F" knob be in or out to run it or does it matter if anyone knows how these work and what they do I would really appreciate the help Thanks again for all the assistance. Garrett<br />garrettcraen@hotmail.com
 
S

seldont

Petty Officer 2nd Class
Joined
Oct 4, 2003
Messages
110
Re: Alcan I have just one more question

If I may, just adjust it for the best idle without bogging down when quickly open the throttle. If it bogs you are too lean. Turning it clockwise should richen and counter clockwise to lean the mixture.
 
A

alcan

Commander
Joined
Dec 14, 2001
Messages
2,505
Re: Alcan I have just one more question

Hi Swellcat<br />As I do not have a picture of your exact model I do not know how the "F" knob works. I suspect that this model is a single cyl air cooled model. If so it will have cooling fins on the cyl. I also suspect that the "F" knob is the low speed needle adjustment. This controls the air/fuel mix when the throtle is closed. It should work as seldont suggests. You might use this feature to smooth out the idle, as while trolling. This should have no effect on high speed running
 
T

The Marine Doctor

Commander
Joined
Jul 25, 2003
Messages
2,177
Re: Alcan I have just one more question

The F knob is used to turn the fuel on and off for the engine.<br /><br />TMD
 
You must log in or register to reply here.
Top