anyone recognize these props??

[bob johnson]

trying to figure out what i have and which will fit the motors I may want some day.

other side

different style:

other side

another style:

can anyone shed some light on what i have

id appreciate it

thanks

bob

 

[CaptainHook]

Re: anyone recognize these props??

Without more info like at least diameter I can't be positive but the last 2 look like really old OMC pin drive.

Depending on size they could be outboard or old omc stringer.

Any numbers on anything?

 

[Frank Acampora]

Re: anyone recognize these props??

Second two look like 10 inch OMC for 40-50 HP. If you can find hubs, they can be re-hubbed to use on Chrysler 35, 45, 55 engines. In those early years, the base prop was the same with different hubs for different engines

 

[bob johnson]

Re: anyone recognize these props??

the first 2 are 9-1/4" X11 props the white one with the numbers 304684

the second two are 10" with no numbers or markings

I also have a smaller one that is stamped 8-1/8 X 8 and is numbered 383315, and also has in pencile written on it 9.5 hp

will that fit anything else besides a 9.5?

bob