AQ 125

[BTU]

My engine ran fine then next morning went to go and nothing, no gauges no clicking when you turn the key. Nothing. Full battery and juice to the starter. Any ideas?

 

[alldodge]

Need to get a volt meter and trace 12V. See if you have power at the key switch. My first thought is the ignition fuse behind the helm

 

[Scott Danforth]

bad connection
bad key switch
safety lanyard pulled

as AllDodge stated, grab a meter and start looking. if you dont have a meter, get one (I use the free meters from harbor freight a lot in addition to my Fluke)

 

[BTU]

Okay will check