Bennet trim tabs

aweiss44

Cadet
Joined
May 23, 2004
Messages
12
any help on this would be appreciated. I have bennet trim tabs on my boat, have had them for about 5 years. About 3 years ago we put the automatic adjuster onto the system as well as the manual adjustment joystick. My question is this, I know that the automatic always cuts out when you make an adjustment on the manual stick, however recently the manual comes on, but when you try to level the boat (set zero) it cuts out. I can't find any blown fuses in the line. any help? thanks.
 

Tabman

iboats.com Partner
Joined
Feb 21, 2002
Messages
566
Re: Bennet trim tabs

aweiss44,<br /><br />When you hold the two set zero buttons to set the boats running attitude into memory the system then shuts off after the setting is captured. To activate the system you have to push the on/off button for aprox 2 seconds? Is that what you are doing? You should only have to set zero once, then the system holds it in memory, and you turn it on and of with the on / off button. Is that what you are doing?<br /><br />Tom McGow<br />Bennett Marine
 

adam24601

Cadet
Joined
May 10, 2004
Messages
29
Re: Bennet trim tabs

Can you tell me about your boat size etc. and what you think of the automatic adjustment control? I am thinking of getting one. Was it hard to install etc.?<br /><br />Thanks,<br /><br />Adam
 
Top